Features

• 【Adjustable & Controllable Temperature】With a thermostat, the temperature of the seedling heating mat can be controllable and adjustable from 5℃ to 42℃(41℉-108℉)Place the thermostat probe as close to the bottom of the pot as possible so that the temperature is accurate.
• 【IP67 Waterproof Rating】 Its surface adopts premium PVC material, which ensures better use safety and longer service life. And it features IP67 high-level water resistance, which is dustproof, splashproof, and easy to clean. Due to its high flexibility, we can roll it up for storage.
• 【INTEGRATED TEMPERATURE CONTROL】Our seedling heat mat comes with a thermostat controller and thermostat probes to give accurate readings in both cold and warm environments. Simply place the temperature probe in the temperature monitoring area and set up the desired temperature. The digital display supports Fahrenheit and Celsius units.
• 【PRINCIPLE】The Seeding heat mat is used to increase the success rate of germination, root cutting. Maintains a consistent heat effectively raise rooting area temperatures approximately 10-20°F above ambient air temperature. Bottom heat excites seeds into thinking it's spring.Can be used greenhouse, nurseries and indoor gardens.
• 【Attention Please ！！！】 Do not place too heavy pots with too small a bottom area on top of the heating pad, as this will result in too much pressure to dissipate the heat, which can lead to high temperatures in localised areas!

Product Description

Controller Set Process 1. Press the SET button to display the current pre-set temperature.The thermostat's LED screen shows the current temperature whenever the SET button is not activated. 2. Press and hold the SET button until the LED starts to blink,then you are able to adjust the temperature up or down by pushing the (UP) or (DOWN) arrows. The thermostat's LED screen shows the numbers as you cycle through them. Press the SET button again to set the chosen temperature. The HEATING light cycles on when the mat is in the process of heating. When the LED is not lit, the mat is not providing heat. The light turns off automatically when the mat reaches the pre-set temperature. 3. Press and hold the (DOWN)arrow button for three seconds to display the temperature in Celsius. Press and hold the (UP)arrow button to display the temperature in Fahrenheit.