The MAC III Performance is a high-output profile moving head with a new interleaved framing system with full crossover of each blade and industry-first continuous rotation for new and unlimited projection, framing and effects possibilities. It is available as a stand-alone fixture or as an easy-to-swap module that installs in minutes on any MAC III Profile™.

• 1500 W short arc discharge lamp with Lok-it!™ base
• CMY color mixing system
• Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade

FEATURES

• 1500 W short arc discharge lamp with Lok-it!™ base
• CMY color mixing system
• Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade
• 7-position color wheel plus open
• Variable CTO
• Gobo animation wheel with full movement / direction control
• Motorized iris
• Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
• Uniform dimming plus mechanical shutter for total blackout
• 1:5 zoom with focus tracking
• Modular design for easy maintenance, servicing and product conversion
• Electronic ballast, fast lamp re-strike and flicker free light
• Pan and tilt (540°/267°) with absolute positioning control
• RDM ready, service USB and Art-Net II prepared
• Battery powered TFT display and jog wheel navigation
• Patented very low-noise cooling. Quietest fixture in its class
• Easy conversion between a profile and performance - no need to invest in two separate fixtures
• 5 indexable rotating gobos
• Framing of focused gobo

SPECIFICATIONS
PHYSICAL

• Length (Head): 712 mm
• Width: 536 mm
• Height: 936 mm
• Weight: 56.5 kg

DYNAMIC EFFECTS

• Color mixing: CMY, independently variable 0 - 100%
• Color temperature control: CTO, variable 6000 - 3200 K
• Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color
• Rotating gobo wheel: Rotating gobo wheel with 5 interchangeable rotating gobos + open, gobo indexing, continuous rotation and shake
• Framing: Continuously rotatable framing module with 4 individually controllable blades
• Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction
• Beam effects: Interchangeable frost filter (or rotating interchangeable prism)
• Iris: 0 - 100%, pulse effects
• Dimming: Combined electronic and mechanical 0-100% continuous dimming, choice of four dimming curves
• Mechanical shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
• Focus: 2 m to infinity
• Zoom: 11.5° - 55° (cut-off angle)
• Zoom-focus linking system: 3-zone
• Pan: 540°
• Tilt: 268°
• Position correction system: Absolute position monitoring

CONTROL AND PROGRAMMING
DMX channels: 33/40
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
RDM: Implemented
16-bit control: Dimmer, gobo indexing (gobo wheel 1), frame rotation, focus, zoom, pan and tilt
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: Opto-isolated RS-485
Firmware update: USB memory device or USB/DMX hardware interface over DMX link
LAMP

• Type: 1500 W short-arc discharge
• Fitted as standard: Osram HTI 1500W/60/P50 Lok-it
• Color temperature: 6000 K
• CRI (Color rendering index): >85
• Average lifetime: 750 hours
• Hot restrike: Semi-hot (restrike in under 90 seconds)
• Socket: PGJ50
• Ballast: Electronic

SERVICE UTILITIES

• Fixture identification: User-settable 12-digit ID number

CONSTRUCTION

• Color(s): Black
• Housing: Magnesium alloy, UV-resistant fiber-reinforced composite
• Reflector: Glass, cold light
• Protection rating: IP20

GOBOS

• Size: E
• Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved)
• Outside diameter: 37.5 mm +0/- 0.2 mm
• Maximum image diameter: 30 mm +/- 0.4 mm
• Maximum thickness: 1.1 mm +/- 0.1 mm

GOBO ANIMATION WHEEL

• Outside diameter: 133.9 mm +/- 0.1 mm
• Image outer diameter: 130 mm
• Image inner diameter: 32 mm
• Thickness: 1.1 mm +/- 0.1 mm
• Construction: Borofloat or better with dichroic or enhanced aluminum coating

INSTALLATION

• Mounting points: Eight quarter-turn locking points
• Orientation: Any
• Minimum distance to illuminated surfaces: 2.5 m
• Minimum distance to combustible materials: 0.2 m

CONNECTIONS

• AC power input: Neutrik PowerCon connector with 3 m cable tail
• DMX and RDM data in/out: 5-pin locking XLR
• Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 socket (accepts Neutrik EtherCon connectors in housing)
• USB memory devices: USB host socket
• Future USB options: USB device socket

ELECTRICAL

• AC power: 200-240 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Main fuses: 16 AT (x 2)
• TYPICAL POWER AND CURRENT
• 200 V, 50 Hz: 1801 W, 9.0 A, PF 0.996
• 200 V, 60 Hz: 1805 W, 9.1 A, PF 0.995
• 208 V, 60 Hz: 1802 W, 8.8 A, PF 0.994
• 220 V, 50 Hz: 1788 W, 8.2 A, PF 0.994
• 230 V, 50 Hz: 1783 W, 7.8 A, PF 0.993
• 240 V, 50 Hz: 1779 W, 7.5 A, PF 0.989
• 240 V, 60 Hz: 1786 W, 7.5 A, PF 0.987
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
• PF = power factor:

THERMAL

• Cooling: Filtered forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.): 40° C
• Maximum surface temperature, steady state, Ta=40° C: 170° C
• Total heat dissipation (calculated, +/- 10% at 200 V, 60 Hz): 6160 BTU/hr.

APPROVALS

• EU safety: EN 60598-1, EN 60598-2-17
• EU EMC: EN 55 015, EN 55 103-1, EN 61 547
• US safety: ANSI/UL 1573
• Canadian safety: CAN/CSA E60598-1, CAN/CSA E598-2-17
• CE ETL C US Intertek