Part Number

We have AL3A-12A650-CHC CMA CXA in stock &  9C2A-12B684-AD

Fitment/Interchange

This ecu will interchange or replace the following ecu part numbers on 2010 F-150 4.6L Trucks: 

9C2A-12B684-AD - You must have "BOTH" this part number and one of the below on your ecu for proper interchange.

AL3A-12A650-BVB
AL3A-12A650-BVC
AL3A-12A650-BXA
AL3A-12A650-BVA
AL3A-12A650-BXB
AL3A-12A650-BXC
AL3A-12A650-BYA
AL3A-12A650-BYB
AL3A-12A650-BYC
AL3A-12A650-BZA
AL3A-12A650-BZB
AL3A-12A650-BZC
AL3A-12A650-CBA
AL3A-12A650-CBB
AL3A-12A650-CBC
AL3A-12A650-CDA
AL3A-12A650-CDB
AL3A-12A650-CDC
AL3A-12A650-CEA
AL3A-12A650-CEB
AL3A-12A650-CEC
AL3A-12A650-CFA
AL3A-12A650-CFB
AL3A-12A650-CFC
AL3A-12A650-CGA
AL3A-12A650-CGB
AL3A-12A650-CGC
AL3A-12A650-CHA
AL3A-12A650-CHB
AL3A-12A650-CHC
AL3A-12A650-CJA
AL3A-12A650-CJB
AL3A-12A650-CKA
AL3A-12A650-CKB
AL3A-12A650-CLA
AL3A-12A650-CLB
AL3A-12A650-CMA
AL3A-12A650-CMB
AL3A-12A650-CNA
AL3A-12A650-CNB
AL3A-12A650-CSA
AL3A-12A650-CTA
AL3A-12A650-CUA
AL3A-12A650-CVA
AL3A-12A650-CXA

Tech Notes

ECU has been tested with our state of the art vehicle simulator which tests over 25 circuits of the ECU! Some of those are listed below:
• Reference Voltage Good!
• ECU has TCU and A/C compressor communication!
• ECU powered up and has communication!
• ECU fuel pump/main relay tested good!
• ECU injectors/coils tested good and much more!

Install Notes

• Disconnect the negative terminal of the battery. Make sure the battery connector is not touching the battery post.
• Disconnect and remove the module to be replaced.
• Install and connect the replacement module.
• Connect the negative terminal of the battery.
• See "Programming / PATS Security" below for additional install instructions. 

Programming / PATS Security

For Plug and Play you must do the following three steps:

Step 1: Match your part number per above fitment guide

Step 2: Program ecu to your VIN. You will need your local mechanic, Ford dealer or properly equipped locksmith to program your VIN into the ecu. Without doing this you will get a "no start" condition.

Step 3: If your vehicle has PATS security (Most Ford/Lincoln/Mercury's do) you must have your keys programmed. We recommend you have this done by your local locksmith. In most cases they will travel to your location and the process takes less than 30 minutes. No towing necessary and your local locksmith will be cheaper than a dealer.

Item Condition

• Mounting points are all open and intact
• Pins perfect, none are broken or bent
• Lock tabs in place
• Connector plastic may have minor chip but pins, guides and lock tabs are in place.

Warranty

This ECM comes with a 90 day warranty from the date of purchase. Please keep a copy of your purchase record which we will send with your item.