Keysight E36105B 60 V, 0.6 A, 36 W Single-Output DC Power Supply (Pre-Owned)

Key Features At A Glance

• Five models spanning up to 100 V or up to 5 A — pick the model that matches your DUT's voltage and current needs
• Standard LAN (LXI Core) and USB 2.0 (TMC488) on every model for SCPI and IVI automated test systems
• Compact 2U quarter-rack form factor saves bench space
• High-contrast OLED display readable from across the bench, even at a sharp viewing angle
• Overvoltage, overcurrent, and overtemperature protection safeguard the DUT and the supply
• Store and recall up to 10 complete instrument setups from non-volatile memory
• Built-in Web interface plus BenchVue software support for remote control, logging, and visualization
• Highly accurate low-current measurement for demanding low-current readings
• Front-panel electronic calibration, front-panel lock, and output enable/disable switch

The Keysight E36100B Series is a family of programmable single-output DC bench power supplies, the latest addition to Keysight's family of bench power supplies. It is engineered to power designs safely and quietly during manual tests or automated sequences, with five models offering up to 5 A or up to 100 V so a user can choose the model best suited to the application. Compact size, an OLED display, and standard remote I/O are emphasized across the line.

A DC power supply delivers controlled, regulated DC power to a device under test, providing the known voltage and current a circuit needs to operate while it is being characterized or debugged. The E36100B Series is intended for both bench-side manual work and computer-controlled automated test sequences, and includes a highly accurate low-current measurement feature for demanding low-current measurements on a connected DUT.

ValueTronics stocks and holds its own inventory in a 20,000 square-foot secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Every pre-owned unit is inspected and functionally verified in-house by our technicians before it ships, while new units ship factory-sealed exactly as received from the manufacturer. Keeping equipment on hand lets us match the right instrument and condition to a specific application and get it out the door quickly.

Brand Heritage

Keysight Technologies traces its roots to Hewlett-Packard, whose test and measurement business was spun off as Agilent Technologies in 1999. In 2014, Agilent's electronic measurement division was established as Keysight Technologies, the company that produces this instrument today.

Compare Other Models in This Series

The E36100B Series comprises five single-output programmable DC bench power supplies that share a common 2U quarter-rack platform, OLED display, front-panel knob-and-keypad interface, and standard LAN (LXI Core) and USB connectivity. The models differ primarily in their maximum voltage and current ratings, letting a user select the output envelope that fits the device under test rather than over-buying capability.

Every model in the series carries the same programming and readback accuracy class and the same protection set — overvoltage, overcurrent, and overtemperature — so the choice between models comes down to the voltage and current required at the output, not to feature tiers.

Each model below links to its own dedicated product page with condition-matched pricing. Select the specific model your application requires, then choose the pre-owned listing that fits your budget and lead-time needs.

The five models span a range of output envelopes: the E36102B is rated 6 V / 5 A (30 W), the E36103B 20 V / 2 A (40 W), the E36104B 35 V / 1 A (35 W), the E36105B 60 V / 0.6 A (36 W), and the E36106B 100 V / 0.4 A (40 W). As maximum voltage increases across the line, maximum current decreases, so higher-voltage models trade current capacity for voltage reach.

Because the models differ in output rating, their per-model regulation, ripple, accuracy offset, and resolution figures also scale with the rating. Refer to the comparison table that follows for the exact voltage, current, and power values of each model so you can match the supply to your DUT's requirements.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• AC power cord (based on destination country)

Product Core & Specifications

Important: Low-range current measurement specifications apply in constant voltage mode and at ≥1% of rated voltage only.

Important: Overvoltage protection (OVP) activation time is less than 1.5 ms only when the trip voltage is greater than or equal to 3 V.

Important: To convert the power supply for different mains power, use the two switches on the bottom of the instrument; see the product manual for details. The factory AC input is set per Option 0E3 (230 VAC), 0EM (115 VAC), or 0E9 (100 VAC).

Recommended pairing: add the E36110A rack mount kit to install the supply in a standard equipment rack, or the J1520AC universal shelf rack or J1526AC metal sliding shelf for shelf mounting.

About this Pre-Owned unit

This pre-owned unit is inspected and functionally verified in-house before it ships and is backed by our pre-owned warranty. To confirm its exact condition, firmware revision, installed options, or included accessories for your application before ordering, contact our Test Architects.

• Warranty included
• Functional verification included
• Standard Calibration Upgrade Options: No Calibration Required, NIST Traceable, Z540.1 or ISO 17025 with Data, Z540.3 Guardbanding with Data.
• Note that unnecessary accessories may not be included (contact Test Architect to confirm).

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.