Mechanical Breaching & SIM CQB Integration – Class Overview

Duration: 1 Day
Format: Open Enrollment
Training Type: SIM/UTM Only
Live Fire: No live fire
Breaching Type: Mechanical breaching only
Skill Level: Beginner to Intermediate
Prerequisite: Safe weapons handling and prior basic firearms training recommended

Course Intent

The Mechanical Breaching & SIM CQB Integration Course is a one-day, open-enrollment training event designed to introduce and develop students in mechanical breaching fundamentals and SIM/UTM-based structure work.

This course focuses on the safe, practical, and controlled application of mechanical breaching tools in a training environment, followed by SIM/UTM-based CQB scenarios that allow students to apply movement, communication, and post-breach entry concepts without live fire.

Students will work individually and in teams while learning how breaching fits into close-quarters problem solving, team movement, communication, and structure-based decision-making.

This course is designed for responsible civilians, law enforcement, and military personnel looking to build a stronger understanding of mechanical breaching and CQB integration in a controlled training environment.

Course Format

This is a SIM/UTM-only course.

There will be no live-fire training during this class.

All structure-based work will be conducted using SIM/UTM platforms, inert training weapons, or approved training weapons as directed by the instructors.

Mechanical breaching will be conducted using approved tools and training doors or designated breach points.

Safety Protocol

Safety is the priority for this course.

All students will receive a safety brief prior to training. Instructors will inspect weapons, gear, SIM/UTM equipment, and training areas before exercises begin.

Any student deemed unsafe in their handling, decision-making, muzzle awareness, communication, or overall conduct may be removed from training at instructor discretion.

KDS reserves the right to restrict, modify, or terminate participation for any student who fails to meet the safety standard.

Learning Objectives

By the end of this course, students will have been introduced to:

• Mechanical breaching fundamentals
• Breaching tool selection and safe handling
• Ram, sledgehammer, and Halligan use
• Breacher and team positioning
• Communication before, during, and after the breach
• Post-breach entry considerations
• SIM/UTM-based CQB movement
• 2-man and 4-man structure movement
• Hallway and room problem-solving
• Team accountability inside a structure
• Decision-making under stress
• After-action review and performance feedback

Course Outline

Morning Block – Safety, Setup, and Fundamentals

Student In-Processing

• Student check-in
• Safety and medical brief
• Gear inspection
• SIM/UTM verification
• Training weapon inspection
• Instructor introductions
• Course expectations and standards

Mechanical Breaching Fundamentals

Students will be introduced to the basic principles of mechanical breaching, including:

• Breaching safety
• Tool control
• Breacher positioning
• Team positioning
• Communication
• Breach sequencing
• Post-breach movement
• Common problems and corrections

Mechanical Breaching Tools

Students will work with common mechanical breaching tools, including:

• Ram
• Sledgehammer
• Halligan
• Pry tools
• Additional instructor-approved breaching tools

Students will learn safe handling, basic application, and how to work around a breach point while maintaining team awareness.

Midday Block – Mechanical Breaching Practical Application

Students will conduct practical mechanical breaching repetitions using designated training doors or breach points.

Training will focus on:

• Tool selection
• Approach to the breach point
• Communication with the team
• Controlled tool work
• Maintaining awareness during breaching
• Moving from breach to entry
• Team flow after access is made

Students will rotate through breacher and team member roles to understand the full process from multiple positions.

Afternoon Block – SIM/UTM CQB Integration

Structure Movement

Students will transition into SIM/UTM-based structure work, focusing on:

• 2-man movement
• 4-man movement
• Room entry concepts
• Hallway movement
• Corner-fed and center-fed room problems
• Communication inside the structure
• Threat identification
• Team accountability
• Muzzle awareness and safe weapons handling

Breach-to-Entry Drills

Students will apply the mechanical breaching process into SIM/UTM structure scenarios.

Training will include:

• Breach team setup
• Breacher communication
• Post-breach movement
• Entry flow
• Problem-solving inside the structure
• Team-based decision-making
• Instructor-led AARs after each run

Scenario-Based Repetitions

The day will end with controlled SIM/UTM scenario repetitions that combine mechanical breaching, team movement, communication, and structure-based decision-making.

Students will receive direct instructor feedback throughout the training.

Course Wrap-Up

The course will conclude with:

• Final safety check
• Gear accountability
• Student/instructor debrief
• Lessons learned
• Individual and team feedback
• Certificates or documentation of completion, if issued upon request

Required Gear List

Students are responsible for bringing the following:

• Eye protection
• Hearing protection
• Gloves
• Helmet, recommended
• Full kit or plate carrier, recommended
• Belt with holster and pouches
• Durable pants
• Long-sleeve shirt or combat top recommended
• Closed-toe shoes or boots
• IFAK with medical gear
• Note-taking gear
• Water and food for the training day

SIM/UTM Equipment

Students should bring SIM/UTM-compatible weapons and protective equipment if they have them.

If you do not have SIM/UTM gear, contact KDS prior to the course to confirm availability.

All SIM/UTM weapons, conversion kits, magazines, ammunition, and protective equipment must be inspected and approved by instructors prior to use.

No live ammunition will be permitted in the training area.

Ammunition Requirement

This is a SIM/UTM-only course.

There is no live-fire ammunition requirement.

Students may be required to purchase or bring SIM/UTM rounds depending on course logistics. If SIM/UTM ammunition is provided by KDS, it may be available at cost.

Course-specific round count will be announced prior to the training date.

Enrollment Terms and Conditions

Open Enrollment

This is an open-enrollment course.

Responsible civilians, law enforcement, and military personnel may apply to attend, provided they meet all eligibility and safety requirements.

Minimum Enrollment Requirement

This course may require a minimum number of students to proceed as scheduled.

If the minimum enrollment requirement is not met, the class may be canceled or rescheduled. If your purchased course is canceled by KDS, you will receive a full refund.

Enrollment Requirements

To enroll in this course, participants must meet the following requirements:

• Must be a United States citizen
• No felony convictions
• No pending legal trials
• No active restraining orders
• Must be legally allowed to possess and train with firearms
• Must be able to safely participate in physical training involving movement, tools, and structure-based exercises

These requirements exist to maintain safety, compliance, and the integrity of the training environment.

Background Checks and Due Diligence

Keystone Dynamic Solutions conducts background checks and due diligence when necessary to ensure the safety and integrity of our programs.

KDS reserves the right to deny training to any individual at its discretion.

Applicants may be required to provide proof of U.S. citizenship and may be subject to background verification.

Student Responsibilities

Students are responsible for arriving prepared, on time, and with the required gear, food, water, and any required SIM/UTM equipment.

Students are also responsible for maintaining safe weapons handling, professional conduct, and accountability throughout the course.

Failure to meet the safety standard may result in removal from training.

Refund Policy

Our refund policy is based on the timing of cancellation.

Full Refund:
A full refund will be issued if the cancellation request is received more than 14 days before the start of the course.

Partial Refund:
A 50% refund will be issued if the cancellation request is received between 7 and 14 days before the start of the course.

No Refund:
No refund will be issued if the cancellation request is received less than 7 days before the start of the course or if the participant does not show up.

Please note:

• Refunds will be processed to the original payment method.
• All refund requests must be made in writing via email.
• Refunds may take up to 14 days to process.
• If KDS cancels the course due to unforeseen circumstances or failure to meet the minimum enrollment requirement, a full refund will be issued automatically.

Training Eligibility Requirement

Keystone Dynamic Solutions reserves the right to refuse training to individuals based on eligibility, safety, legal, or professional conduct concerns.

This course is available to United States citizens who are legally permitted to possess and train with firearms.

KDS does not provide this training to non-U.S. citizens, individuals with felony convictions, individuals with active restraining orders, or individuals with similar disqualifying legal statuses.

By enrolling, students acknowledge and agree to all eligibility requirements, safety standards, refund policies, and course expectations.